→ PIC A1: Preparation work
1. the bags of wire rope woven mesh you received
2. open the bags you will see the mesh rolled
3. expand the zoo mesh, the natural mesh each angles are not 90°
4. some of these fittings: wire ropes, ferrules, tongs, ect
Then, install according to the following methods.
The diagram of standard installing method of stainless steel rope woven mesh.
→ PIC A2, A3, A4: Install steps
Step 1, Determine the width and height of mesh direction according the pic A2;
Step 2, First fix the two corners with cable ties, said, first fix 1 and 1 mark at;
Step 3, Fix TOP line A;
Step 4, Fix height direction's 2 and 2, 3 and 3, 4 and 4,5 and 5... codes at the left and right followed by uniform in pic A3
Step 5, Fix the mesh to the bottom;
Step 6, Using the wire ropes back and forth between the mesh and frame, this method is the most common way, fast and strong.
Step 7, The ends of both perimeter ropes must be threaded through a ferrule and then pulled taught. Now, all the cable ties can be remove.
Step 8. Swage the ferrule with the swaging tool, and cut off lose ends of the perimeter rope. Now, each of the mesh angle is 90 °.
English
