Crane Fence Netting

▼ Advantages of "Stainless Steel Wire Rope Woven Mesh" used for Crane fence netting

◆ Crane fence netting mesh are pliable, transparent grid structures made of stainless steel rope are multifunctional and durable.

◆ Stainless steel rope netting can create a totally enclosed space for the crane birds, make it highly closed to the nature.

◆ The flexible crane netting for Crane fence netting are more beautiful and stronger than the chicken wire and non-metal mesh.

◆ Wire rope crane netting mesh are premium-quality, never rusted, no need to maintenance for more than 30 years.

◆ Cable mesh netting incredibly well suited for zoo, safari park, bird park, garden, protective, ocean, acrobatics, decorative and the similar environments.

◆ Stainless steel wire netting are highly compatible with creative contemporary architecture.

★ Completed zoo mesh products codes list table download click here：LIULIN ZOOMESH PRODUCT LIST.pdf

▼Stainless Steel Wire Rope Woven ZooMesh Key Points:

This tab include the details of: 

1. Zoo Mesh Installation

2. Mesh Panels Connection

3. Fitting and Tools

4. Other notes

1. Install the stainless steel wire rope zoomesh

▼ Installation details of wire rope netting mesh

 → PIC A1: Preparation work 

 1. the bags of wire rope woven mesh you received

 2. open the bags you will see the mesh rolled

 3. expand the zoo mesh, the natural mesh each angles are not 90°

 4. some of these fittings: wire ropes, ferrules, tongs, ect

 Then, install according to the following methods.

 The diagram of standard installing method of stainless steel rope woven mesh.

 → PIC A2, A3, A4: Install steps

 Step 1, Determine the width and height of mesh direction according the pic A2; 

 Step 2, First fix the two corners with cable ties, said, first fix 1 and 1 mark at;

 Step 3, Fix TOP line A;

 Step 4, Fix height direction's 2 and 2, 3 and 3, 4 and 4,5 and 5... codes at the left and right followed by uniform in pic A3

 Step 5, Fix the mesh to the bottom;

 Step 6, Using the wire ropes back and forth between the mesh and frame, this method is the most common way, fast and strong.

 Step 7, The ends of both perimeter ropes must be threaded through a ferrule and then pulled taught. Now, all the cable ties can be remove.

 Step 8. Swage the ferrule with the swaging tool, and cut off lose ends of the perimeter rope. Now, each of the mesh angle is 90 °.

ZOO MESH INSTALL DETAILS -1: 

Have the wire ropes back and forth between the zoo mesh and frame, this method the most common way, fast and strong.

△ Installation details of edges of wire rope netting mesh  

ZOO MESH INSTALL DETAILS -2: 

Using the ferrules with "eyes", in this way, we need to reserve the ferrules with "eyes" on the four edges during the production. The specific method is also to use wire rope go through the ferrules, and make it back and forth between the frame and the ferrules with "eyes". The benefits of doing so so very beautiful, and always adopted on the decoration. If you have interests, please specify when ordering.

△ Ferrules with eye installation details of the wire rope mesh edge 

2. Join the wire rope netting mesh panels (Vertical and horizontal)

For the convenience of the production, transportation and installation, we usually produce the wire rope mesh panel in size of 10m X 20m, if you are about to oder the over size mesh panel, you may extend or increas the mesh to your size by the following way,
▽(1) to increase the length of the wire rope mesh: use the wire ropes to connect the two edges of the two mesh, like stitching.

 

(2) there are two way in which you could increase the vertical height of the wire rope netting mesh:
▽A. use the wire rope to connect the two edges of the two mesh, like stitching.

 

▽B. reserve the ferrules with "eyes" in advance, and use the wire rope to connect the two mesh panel.

 

3. Fittings and tools

Our common tools are wire rope scissors, say, Felco C9,C7 and etc., the main accessories are variety of ferrules, made of stianless steel or aluminium, with the track oval shape and "8" shape, and ferrules with "eyes" as well.If you are in need of the above mentioned accessories, please contact us for a quote.
We are also trying to dye the stainless steel wire rope ( natural metal color ) into the bronze color and black color, if you have interests, please contact us for the details. 

Aluminum Ferrules: 1.2MM - 4.0MM

02.Customers remit a part of amount as deposit, we arrange producing the mesh.
03.Production completed, customers pay for the balance, we delivery the goods.

Now, start ordering!